SharqStor FS 10000 FC RAID Head Detailed Specifications

• Multiple arrays configurable with dedicated or global hot spares

• RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD

• Four (4) FC-2G I/O channels with bypass circuit embedded to eight (8) FC ports on separate I/O modules
• Auto-negotiate FC-AL, point-to-point, or switched fabric
• Concurrent I/O commands
• Tagged command queuing up to 256
• Variable stripe size per logical drive
• Optimization setting for random or sequential I/Os

• Firmware-embedded utility via LCD keypad or RS-232C port
• Host-side SES emulation with pass-through to back-end SES emulation
• VT-100 terminal emulation via RS-232C
• Telnet access via onboard Ethernet port
• 10/100 BaseT Ethernet for out-of-band management
• Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
• Firmware-embedded Java-based RAIDWatch manager:

    * Graphical user interface
    * Local/remote management; in-band or out-of-band via TCP/IP
    * Centralized management to monitor and administer multiple RAID units on one screen
    * Secure link over SSL

• Configuration Client for easy access to the configuration utility screen
• SNMP 2.0 MIBs with get and set commands

• Up to 1024 LUNs (if sufficiently large memory is used with the proper settings)

• Two (2) RAID controller modules
• Two (2) 512MB DDR RAM DIMM modules (pre-installed on the controller modules)
• Two (2) hot-swappable, redundant, 250W power supply units (PSUs)
• Two (2) hot-swappable, redundant cooling modules
• Four (4) independent I/O modules per controller

• Onboard alarm is triggered when one of the following fails:

    * RAID controller module
    * Cooling module
    * Power supply unit
    * I/O module
    * BBU module

• Module status LED indicators:

    * Three (3) per LCD panel
    * Six (6) per RAID controller module
    * Two (2) per Ethernet port
    * One (1) per BBU module
    * Two (2) per cooling module
    * One (1) per PSU
    * One (1) per Fibre port on I/O module

• Module failure alert through I²C bus
• Event notifications sent over email, fax, LAN broadcast, SNMP traps, MSN messenger, ICQ, SMS short messages

• System alerts through Java-based RAIDWatch manager

• Eight (8) FC ports, each using a short-wavelength adapter
• Two (2) COM ports on each controller module for RS-232C serial port (38400, n, 8, 1) and UPS support
• One (1) 10/100BaseT Ethernet port on each controller module

• Two (2) 12V 250W  redundant, hot-swappable power supplies with PFC

• Industry standard  rack-mountable 1U chassis
• Dimensions (inch - WxDxH): 4.17" x 10.43" x 1.57"
• Dimensions (mm - WxDxH):  106 x 265 x 40

• FCC
• CE
• CB