SharqStation 725 SATA II Detailed Specifications
Back to Specifications
Back to Product
|
Processor
|
- Dual mPGA604 ZIF sockets; FSB support 800MHz
- Up to two Intel Xeon processors
- Dual onboard 4-phase VRDs (VRD 10.1 spec.)
|
|
Chipset
|
- Intel E7525 chipset; MCH +ICH5R +PXH +FWH
- Intel PXH supports two PCI-(X) buses
- Winbond Super I/O chip
- Analog Device ADM1027 hardware monitor chip
|
|
Memory
|
- 144-bit dual channel memory bus
- (8) 240-pin 1.8 -Volt DDR II DIMM sockets
- Supports up to 32GB(single rank) of Buffered DDR memory
- Supports ECC type memory modules
- Supports DDR II 400/533 memory
|
|
Expansion Slot
|
- One PCI Express x16 Graphics slot
- One PCI-X 64-bit 133/100/66MHz (3.3V) slot
- Two PCI-X 64-bit 100/66MHz (3.3V) slots
- Two PCI 32-bit 33MHz (5V) slot
|
|
Integrated LAN Controllers
|
- (1)Broadcom BCM5751 PCI Express GbE LAN
|
|
BIOS
|
- Phoenix BIOS on 4/8Mbit Flash ROM
- Supports BIOS Boot Specification v1.1 (BBS)
- Supports ACPI; supports SMBIOS v2.3
- Supports LAN remote boot (PXE)
|
|
Rear I/O Ports
|
- Stacked PS/2 Mouse & Keyboard ports
- Stacked 4 USB 1.1 ports
- (1) IEEE1394a (FireWire) port
- (1) 9-pin UART Serial port;
- (1) RJ-45 connections
|
|
Chassis Form Factor
|
- Industry standard Pedestal chassis
- Dimensions (inch - WxDxH): 8.1" x 23" x 17.6"
- Dimensions (mm - WxDxH): 206 x 584 x 446
|
|
Drive Bays
|
|
|
Storage
|
- Hard Disk Drives - support 6 fixed SATA II HDD
- One 5.25" CD-ROM drive (standard)
- One 3.25" FDD (standard)
|
|
Power Supply
|
- EPS 12V 550W output w/PFC
|
|
Front Access I/O ports
|
- I/O - Two USB 1.1 port
- (1) IEEE 1394 (Firewire) port
- (1) IDE channel activity LED
- (1) LAN link/activity LEDs
- Power LED
- Fan LED
- Switch 0 power; reset; buzzer
|
|
Server Management
|
- 3-pin fan headers with tachometer monitoring
- One 3-pin Chassis intrusion header
- Temperature, voltage, & fan RPM monitoring
|
|
Regulatory
|
|
|
